1
1
1
104
1
1
Apply
Reset
27
7
10
15
22
2
4
2
5
21
4
6
12
17
22
18
9
40
Apply
Reset

Exhibitor List 2018

Log in to My Summary
A
A GRUPP

Welcome to visit

  • Booth A GRUPP 81C17
Akyapakrus

Welcome to visit

  • Booth Akyapakrus 81C21
In the journal All About the Building World you will find the most complete information on the building industry in Russia and the world, the last technical novelties, up-to-date technologies, and also all about construction materials and repair, about an interior and design in the house. The subscription to the journal is carried out.

Welcome to visit

  • booth All About the Building World 81D48
Alta-Trans
Alta Trans Ltd. was founded in 1998. Since 2001 the company has been supplying high quality sheet metal processing equipment by European manufacturers in Russia.

Welcome to visit

  • Booth Alta-Trans 81C45
ArskMetall
Since 1995 the company has specialized in manufacture of shaped decking, steel structures and sandwich panels.

Welcome to visit

  • Booth ArskMetall 81B40
Wide range of high-quality production:
- Rolling products made of carbon, structural, shipbuilding, boiler, low-alloyed, corrosionproof, heat-proof steel grades and alloys;
- Strip made of low-carbon, stainless steel;
- Strip and magnetic cores made of electrical (silicon), amorphous, nanocristal steel grades and alloys;
- Consumer goods made of stainless and carbon steel intended for home, garden, rest and tourism.

Welcome to visit

  • Booth Ashinskiy Metallurgical Works 81A18
B
BT SVAP
BT SVAP Ltd. is a modern enterprise specializing in steel products and steel structures design, manufacture and set up as well as steel strucutres corrosion protection and logistics. The company's production facilities are located in the Moscow region and Astrakhan.

Welcome to visit

  • Booth BT SVAP Каталог
Publishing House Building Expert represents:
- Construction Technology is a scientific and technical Advisory journal of hospital's construction and reconstruction and the architectural-design issues;
- Quality Architecture (special issue) is an annual catalogue of the best architectural projects over the last years in Russia;
- Building Expert (www.ardexpert.ru) - architectural-construction industry portal for professionals and consumers of the construction market.

Welcome to visit

  • booth Building Expert, Publishing House 81D48
C
Building, Scientific Research Centre, OJSC, Central Scientific and Research Institute of Building Structures Named after V.A. Kucherenko was established in 1927. The Institute specializes in design of new types of steel, stone, wooden, plastic etc. structures as well as their protection.

Welcome to visit

  • Booth Building SRC, CSRIBS Named after V.A.Kucherenko 81C15

Welcome to visit

  • Booth Chelyabinsk Zinc Plant 81D18
Kompozit produces the following Informative science-and-engineering journals (distributed through subscription):
- Construction materials, equipment and technologies of the XXI century (15 000 copies monthly);
- Concrete technologies (15 000 copies monthly);
- Roofing and insulation materials (15 000 copies monthly);
- Dry plasters & mortars (15 000 copies monthly).

Welcome to visit

  • booth Concrete Technologies 81D29
Kompozit produces the following Informative science-and-engineering journals (distributed through subscription):
- Construction materials, equipment and technologies of the XXI century (15 000 copies monthly);
- Concrete technologies (15 000 copies monthly);
- Roofing and insulation materials (15 000 copies monthly);
- Dry plasters & mortars (15 000 copies monthly).

Welcome to visit

  • booth Construction Materials, Equipment and Technologies of the XXI Century 81D29
Construction Technology is a scientific and technical Advisory journal of hospital's construction and reconstruction and the architectural-design issues.

Welcome to visit

  • booth Construction Technology, Journal 81D48
D
DEGESTA
We specialize in manufacture of modern cotruction materials: grids and welded decking. High quality is ensured by fully automated production.

Welcome to visit

  • Booth DEGESTA 81D32
Professional transportation of metal structures, metal products, all kinds of rolled metal, metal sheets, pipes and pipe assortment, equipment (including complex), machinery parts by trucks in Russia and to Kazakhstan.
Modern own fleet of over 1200 road trains. Tarpaulin semi-trailers with volume of 90m3 (length 13.6 m) and 110m3 (length 16.5 m), bunk stakes.
Improved crate of the trailer. All types of loading / unloading (bottom, top, side)
Experience of working with industry leaders more than 18 years.
Professionally. Securely. Without overpayments.

Welcome to visit

  • Booth Delko Transportation Company LLC 81B21
DEPO
Monthly Railway Journal Directory DEPO is published in the spring of 2008. The magazine provides information on manufacturers and suppliers of all range of products railway destination:
- Manufacturers of railway products and services;
- Rolling stock, spare parts, repair;
- Materials and equipment for VSP;
- Railway tools, equipment;
- Transport and logistics services;
- Machine tools and press-forging equipment;
- Related products and services;
- Legal and insurance services for rail transport enterprises;
- Methodical and reference literature. Database.

Welcome to visit

  • booth DEPO 81D48

Welcome to visit

  • Booth Designs and Construction Company 81B11
DiPOS
Since 1992 DiPOS Group of Companies has been a large supplier of steel rolled products ion Russia and the CIS.
More than 150 employees.
A wide regional network.
A wide range of steel products (more than 1500 items).
Modern production.
More than 1 000 000 t of sold products.
More than 70 hectare of warehouses.
Innovarive technologies.
Quality control.

Welcome to visit

  • Booth DiPOS 81C30

Welcome to visit

  • Booth Dolina, Kuvandyk Press-Forging Equipment Plant 81D07

Welcome to visit

  • Booth Donsky Power Pylon Plant 81C12
E
International information and technology full-color A4 format Magazine Equipment and Tools for Professionals. Metalworking has been published since 2000 and is 100 pages in volume.
The circulation figurers are 10,000 copies 6 Issues a year.
Target groups: Management and leading technologists, metallurgists, welders, supply agents of machine building plants, metallurgical works and other industrial enterprises, research officers, university teachers.
Rubrics: metal working, welding, machines, tools.

Welcome to visit

  • booth Equipment and Tools for Professionals 81D48
Everything for Construction, Journal covers the latest trends and the most pressing issues of construction.

Welcome to visit

  • booth Everything for Construction 81D48

Welcome to visit

  • Booth EVRAZ Metall Inprom 81C44
F
Fasteners, Adhesives, Tools and ... Magazine is published since 2002 and contains the information on modern products and assembly technologies, the News from foreign partners.  The partners of the magazine: leading foreign and Russian manufacturers and traders of fasteners, adhesives, tools ... and also foreign specialized editions. We see our mission in providing fastener, adhesives, tools traders and users with technical supportive information as well as in promoting foreign companies based on high-quality products and advanced technology into the Russian market. PDF-copies are available at www.fastinfo.ru.

Welcome to visit

  • booth Fasteners, Adhesives, Tools and..., Magazine 81D48
G
The construction materials for a healthy lifestyle that GREEN PLANET manufactures (innovative construction termo-insulation on the basis of special fibers Organic Fiber) are absolutely safe for a person - we care about our clients and the world in which we live. GREEN PLANET also produces the unique thermo-insulation system for rapid development structures FORAPROFI - we erect and insulate all kind sof warehouses and tent halls in the shortest timeframes, starting from 10 days. The company is a part of GC "Ves Mir" - non-woven materials Market Leader for 17 years in a row. Producing high quality goods using advanced technologies, to meet the daily needs of a modern person has been the mission of the company where over 350 professionals work providing the highest standards and serious production volumes.

Welcome to visit

  • Booth GREEN PLANET, Construction Materials Plant 81D27
H

Welcome to visit

  • Booth Harbin Weike CNC Technology Development 81B36
I
INSI

Welcome to visit

  • Booth INSI 81C47
InterChemmet

Welcome to visit

  • Booth InterChemmet 81D17
Invent

Welcome to visit

  • Booth Invent 81C03
For 70 years we have been rendering comprehensive informational services to the enterprises and organizations in the iron and steel industry and related sectors. Research within the whole range of the equipment and technology development in steel industry and market of steel products. Publication of the following journals: News of the Iron and Steel Industry in Foreign Countries, and Iron & Steel Industry Bulletin.

Welcome to visit

  • booth Iron & Steel Industry Bulletin 81D48
K
Kabel.RF
The company Kabel.RF is not only the leading expert in the cable industry, but also one of the top distributors of cable and electrical products in the Russia market. There are more than 100,000 items in our business directory that allow the clients to make the right decision. Kabel RF distributes cable products from warehouses located on the territory of Russia. When you order our products, we will provide all the nessesary certificates and documents about the product`s quality.
Kabel.RF: We follow new trends in the cable industry and electrical engineering and we have promised to provide our customers with the best products and excellent service!

Welcome to visit

  • Booth Kabel.RF Каталог
Coiled galvanized steel wholesale. Manufacturing of construction materials from galvanized steel: metal tile “Spanish Sierra”, shaped boarding, seam roofing, metallosiding (soffit, ship plank, lining), light steel girders, profile for gypsum plasterboard assembly, reinforcing profile, ventilated facades elements (panels, cassettes, brackets), moulded members for roofing and facades, expanded lath. Slitting-and-cross metal cutting services.

Welcome to visit

  • Booth Kazan Steel Profiles 81C32
Know-House.ru is a leading Internet-portal on Construction subjects. It contains the whole necessary general information on modern building products and technologies. It also contains catalogues and technical information from leading manufacturers and distributors. All this information is completed by existing norms, the time-table and information on International construction exhibitions etc.

Welcome to visit

  • booth Know-House.ru 81D42
Rolled stock manufacture and sales.

Welcome to visit

  • Booth Korolevsky Pipe Works 81B32

Welcome to visit

  • Booth Krasnodar Metallic Structure Plant 81C26
Kurganstalmost, CJSC is one of the largest Russian holdings specializing in steel structures design and manufacture.

Welcome to visit

  • Booth Kurganstalmost 81A03
L
LiderTrans
LiderTrans is one of the leaders in long distance freignt trucking logistics (FTL). The fleet of vehicles consists of more than 100 contemporary road trains.

Welcome to visit

  • Booth LiderTrans 81A23
Liteinoye Proizvodstvo
The international scientific-technological journal «Liteinoye proizvodstvo» with a scientific attachment each decade, is the country’s leading scientifictechnological journal covering foundry issues. We have recently celebrated our 80-th anniversary. «Liteinoye proizvodstvo» monthly gives unique information on the domestic industry’s new processes, technologies,
equipment and materials used for quality casting production. We also cover exhibitions, seminars and other considerable events, give analytical reviews of mostly prospective enterprises within the context of modern trends in Russia’s economy, introduce the industry’s key personalities in Russia and the CIS.

Welcome to visit

  • Booth Liteinoye Proizvodstvo Каталог
M
Public Joint Stock Company Magnitogorsk Iron and Steel Works (PJSC MMK) is one of the world's largest steel producers and holds leading positions among the Russia`s steel-making companies.
The company's assets in Russia include a large steel producing complex encompassing the entire production chain, from preparation of iron ore to downstream processing of rolled steel.
MMK turns out a broad range of steel products with a predominant share of high-value-added products.
Main customers of MMK on the domestic market include pipe-making companies, hardware companies, machine-building and automotive companies.
In 2017, MMK Group produced 12.9 million tonnes of crude steel and 11.6 million tonnes of commercial steel products. MMK Group’s revenue for 2017 amounted to USD 7.546 billion, EBITDA — USD 2.032 billion.

Welcome to visit

  • Booth Magnitogorsk Iron and Steel Works 81C02
Marguerite group
Marguerite group Communications Agency: complex and individual approach to solving business tasks of the customer.
We offer complex communication solutions based on:
- your business goals;
- Analysis of the state of things in your product category;
- Analysis of strategies of your competitors and their brands positioning;
- Specifics of your products use and the end-users’ behavior;
- Lifecycle phases of your product;
- Your company’s potential.
Marguerite group Communications Agency specializes in:
- Development of complex communication solutions;
- Positioning development;
- Development of promotion strategies;
- Market researches;
- Start up;
- Post-production and creative ideas;
- PR-promotion and support;
- Event;
- Media planning and media buying.
We work with new and already existing business ideas: from the project’s launch to its support.

Welcome to visit

  • Booth Marguerite group Каталог
Mashtechnica

Welcome to visit

  • Booth Mashtechnica 81B22
Sales of MASSCO corrosion resistant materials.

Welcome to visit

  • Booth Massco Trade House 81A39
Mcena.ru
Mcena.ru information and analytical portal. Daily changing prices for rolled products and tubes by leading Russian producers.

Welcome to visit

  • booth Mcena.ru 81D40
Mechel Service is a service and sales network which markets Mechel Group's steel products in Russia.
Currently, there are 59 Mechel Service warehouse facilities working in 43 Russian cities. Mechel Service owns 18 service centers for additional processing of steel rolls.
Mechel Service markets a wide range of steel products — rebar (including cold-worked one), regular flats, shaped flats, fine steel rolls, Bp-1 wire, steel shapes, hardware, wire rope, stainless longs and flats, welded and shaped pipes, welded mesh.
Mechel Service is part of Mechel Group’s steel division managed by Mechel-Steel Management Company.

Welcome to visit

  • Booth Mechel Service 81B16
Melnikov Central Research and Design Institute of Steel Structures (STAKO©) is an expert in designing, examining, expertise and scientific research of metal structures.
We offer design projects and expert reports in different fields such as:
- Unique buildings and constructions from metal structures (long-span buildings, high-rise constructions, light steel thin-walled structures, reservoirs, bridges, towers, tower silos);
- Curtain wall systems;
- Welded seams;
- Protection from corrosion (including sherardizing).
Creating regulatory documents and certificates for expansion foreign companies on Russian market.
Accredited laboratory CNIIPSK-TEST offers services in expertise of metal constructions, fixing systems, pipes, test operations of corrosion protection and sherardizing.
Independent examination in court.
Postgraduate studies and continuing education in metal structures field.

Welcome to visit

  • Booth Melnikov Central Research and Design Institute of Steel Structures 81A33
Published since 1996. reklama@metalinfo.ru
Circulation: 8 000—12 000 copies, at least 112 full-color type pages, a special issue in English.
Periodicity: 12 issues a year (monthly).
Scope: Russian & international ferrous & non-ferrous markets: news, analytics, interviews, reviews, reports, etc.
Target groups: Russian producers and traders of steel, rolled products, tubes and pipes, steel wire products, non-ferrous metals and alloys, major metal and steel consumers, as well as to the CIS enterprises & companies.
Arranging & holding of the largest annual conferences (ferrous and non-ferrous metals).
Membership: Russian Union of Metal and Steel Suppliers, Russian Union of Industrialists and Entrepreneurs.

Welcome to visit

  • Booth Metal Supply & Sales 81A43
Metal-Expo
Metal-Expo Co., Ltd. is the organizer of Metal-Expo, MetallStroyForum, MetallurgMash, MetallTransLogistik, SteelStructures, annual international industrial exhibitions, as well as Metallurgy.Russia, Litmash.Russia, Tube.Russia specialized exhibitions. Metal-Expo is a full member of The Global Association of the Exhibition Industry (UFI), Russian Union of Industrialists and Entrepreneurs, Russian Union of Exhibition and Fairs, and an associated member of Russian Union of Industrialists and Entrepreneurs. The exhibitions organized by Metal-Expo are endorsed by the Ministry of Industry and Trade of the Russian Federation, Moscow Government, Russian Chamber of Trade and Commerce, Russian Union of Metal and Steel Suppliers, and the International Union of Manufacturers of Equipment for Metal and Steel Industry (Metallurgmash).
For details, please visit www.metal-expo.com or call: +7 (495) 734-99-66.

Welcome to visit

  • booth Metal-Expo 81C01
The Metallinvest company since 1991 successfully works at the market of metal rolling and proved as the reliable partner supplier of metal, and also as the producer of steel products.
The company is a member of RSPM and occupies leading positions in the rankings Russian metal trading companies in the nomination "The Best Marketing Network of Russia" and "The Best Metalbase of Russia".
Representation of the company Metallinvest with own warehouses of rolled steel are located in major cities of the Russian Federation.
Main advantages of the company Metallinvest: the wide commodity range of high-quality metal rolling in warehouses, including own production; complete set of cars of any difficulty; individual and flexible pricing; commodity crediting; speed of service and the minimum delivery periods.

Welcome to visit

  • Booth Metallinvest Management Company 81B12
MetallTrade is a periodic advertising-information magazine for professionals of industrial supply and the sale. The magazine leaves in circulation of 7000 copies 2 times in month and has site www.metaltd.ru where we publish the latest news in sphere of the Russian and world iron and steel industry and also news of our partners.

Welcome to visit

  • booth MetallTrade Magazine 81D48
Leading Russian-language Journal for the Steel Industry since 1956. Unrivaled Advertising Price/Efficiency Offer to Suppliers to the Iron and Steel Industry.
Subjects covered:
- Development prospects for the metallurgical industries;
- Economics;
- Scientific and technical developments;
- Materials and product quality;
- Main enterprise funds: diagnostics and repair;
- Automation and control;
- Environmental protection;
- Patents;
- Company presentations.
The Metallurg Magazine is translated into English by the company Springer.
Metallurg is distributed by subscription in the CIS and 15 countries world-wide. Index 70535.

Welcome to visit

  • booth Metallurg Magazine 81D48
Metallurgical Bulletin is a Russian monthly magazine providing unexcelled insight into the domestic and global ferrous and nonferrous metals markets through a large spectrum of information, news, price movements and analytical coverage and forecasts. Metallurgical Bulletin is a full-colored glossy with a circulation of 7500 issues spread throughout Russia, the CIS countries and beyond.

Welcome to visit

  • booth Metallurgical Bulletin 81D43
The international scientific-technological journal Metallurgy of Machinery Building is issued six times a year. It publishes articles on innovative metallic materials for machinery construction, methods of their processing, prospective technologies of blank production stage. We deal with the work of metallurgy departments ofthe largest machinery construction enterprises of Russia and the CIS and present the equipment of domestic and foreign manufacturers.

Welcome to visit

  • Booth Metallurgy of Heavy Industry Каталог
MetalTorg.Ru
MetalTorg.Ru is a Russian most frequently visited web service highlighting metal markets via its fresh-time news line and thorough analytical reports and outlooks, as well as price monitoring and price-indexes both on ferrous and nonferrous metals markets in Russia and overseas. MetalTirg.Ru provides on a daily basis price-lists, Bulletin Board with an extensive stream of renewing offers and invites to its Forum all those  interested in metal market developments.Publisher — Megasoft LLC.

Welcome to visit

  • booth MetalTorg.Ru 81D43
High-strength and hot-dip galvanized fasteners.

Welcome to visit

  • Booth Metprom-Ural PKF 81A41
MMK-METIZ
We specialize in manufacture of modern cotruction materials: grids and welded decking. High quality is ensured by fully automated production.
Manufacture and sales of hardware products: nails, steel ropes, nettings, welded products, fasteners etc.

Welcome to visit

  • Booth MMK-METIZ 81A42
We present to your attention a new porject of the Russian company SIC MontReNal. The aim of the porject is not only to provide the prospective customer with information about the impeccable quality of lifting equipment of the German manufacturer ABUS Crane Systems GmbH, but also to give him an expert assessment, professional advice, giving a balanced approach to choosing a supplier of lifting equipment. With a significant presence in the market of representatives of other European manufacturers of lifting equipment, the strategic task for the coming years of this project is the active promotion of ABUS brand in the Russian Federation. With us you will receive:
- Reliability;
- We offer a 2-year warranty on new equipment, service throughout Russia;
- Opportunity;
- The ABUS equipment characterized by reliability, utility, and especially low operating costs, is designed and manufactured using the latest technology;
- Competence;
- The ability to maintain a client program, which are integral parts of it: consultation on the Internet and the phone - the optimal projects that meet the requirements of customers, installations, warranty and post-warranty service.

Welcome to visit

  • Booth MonReNal, Service-Engineering Company LLC 81A30
Monsteelcon
The company specialisez in: - Supplies of galvanized rolled steel for further processing; - Manufacture of shaped galvanized rolled stock; - Manufacture of polymer coated galvanized rolled stock; - Manufacture of roofing materials; - Rolled steel cutting and slitting.

Welcome to visit

  • Booth Monsteelcon 81B30
Morozov Chemical plant — one of the leading manufacturers of industrial anticorrosion coatings in Russia. Produces innovative paints "Armokot" on the basis of the polysiloxane. Materials are available from leading institutions in the country. The quality management system is certified according to ISO 9001-2008 by German concern BVQI.

Welcome to visit

  • Booth Morozovsky Chemical Plant, TD 81C28
Moscow Interregional Association of Chief Welders unites chief welders, chief metallurgists and chief engineers of industrial enterprises.

Welcome to visit

  • booth Moscow Interregional Association of Chief Welders 81A31
Mounting and Special Works in Construction, Journal. For more than 75 years the journal has been publishing articles on the most pressing issues of industrialisation, technical progress, economy of the construction industry. Please visit www.montazhnie.ru for details.

Welcome to visit

  • booth Mounting and Special Works in Construction, Journal 81D48
N

Welcome to visit

  • Booth Noginsk Tubes-Forming Works 81D21
Steel structures manufacture and set up.

Welcome to visit

  • Booth Novinsky Steel Structures Plant PSK 81B32
P
Parallel
Parallel is a manufacturer of high impact fasteners with quality grade up to 14.9. Modern factory for fasteners production in Russia, one of the biggest suppliers of higher quality grade fasteners:
- Cutting edge equipment made by the best world manufacturers;
- European level of labor productivity;
- Overall production 6 000 tons of fasteners and engineering units per year, quality control system is certified in accordance with ISO 9001:2008;
- Certified laboratory performs all kinds of destructive and non-destructive inspection.
We manufacture bolts, nuts, washers, studs, items according drawings: From M5 up to M150 Any steel kind with tensile grade 8.8, 10.9, 12.9, 14.9, Any kind of finishing With coating or plain With non-standard threads and various thread pitches, We execute orders from 1pc up to dozens of tons Certified by bridge inspection. We are open for your specialists visits and for outsource technical audit.

Welcome to visit

  • Booth Parallel 81C16
PMK
PMK Steel Structures Plant specializes in steel structures design, manufacture and set up.

Welcome to visit

  • Booth PMK 81C35
Producer of plugs and moulds as well as industrial cuttings tools. Supplier of complex solutions to steel structures plants processes automation.

Welcome to visit

  • Booth Precise Power Group 81A15
The desire to become a total welding solution provider was the decisive factor in the formation of Primo Automation PVT. Ltd. Since its inception, we have been striving hard to give high quality product solution to create a comfortable, functional yet efficient work environment with everlasting client relationship. In short, we introduce ourselves as one of the leading welding automation solution provider and authorized distributor of Lincoln Electric Automation products in India. Started in 1995, as a job shop, today with a turnover of more than $600 million, we strive to support our esteemed customers with high quality and reliability, economical price and in time delivery. Primo today caters to wide spectrum of industries in peb construction, valve, earth movers, wind tower and boilers. Primo Automation is a 25-year old welding automation specialist based out of Chennai, India. We are in the business of conceptualizing, designing, manufacturing, installing and commissioning special purpose welding and cutting automation systems since 1995. we’ve been supplying H-Beam machines since 1999. We’ve installed 85 machines in 5 countries for more than 60 clients. In total, our machines produce more than 35,000 tons of welded beams every month. Primo’s continuous engineering improvement brings more versatility when it comes to beam shapes. For eg., Primo machine can make:
- Parallel beams;
- Single taper Beams;
- Combination of parallel and taper;
- Double taper beams – outward taper;
- Double taper beams – inward taper;
- Curved beams with radius over 12m.
Primo’s unique scalable machine design allows the customer to start their investment at a lower level and scale up as their business grows. The current entry level machine has a capacity to assemble and weld beams from a lower tonnage which can be scaled up to a complete version with which a higher tonnage can be used for 1000 Tons per month.

Welcome to visit

  • Booth Primo Automation Systems 81D15
Trade from the storage and the contract deliveries of steel and plastic sheet piles (panels) from Japan, Korea, USA, Germany, Czech Republic, Poland, Russia, Luxemburg - sheet piles U-section, Z- section, flat; cold-bent; welded: pipes piles, bearing piles; the piles connectors of different types with the interlock of the Larsen type, “Ball and Socket Interlock”, cold-bent interlock, welded interlock or without the lock; the combined walls and system with the elastic moment to 50 000 sm3/m.
Complex of services on driving and extraction sheet piles - selection under the project, delivery, driving, extraction, removal, reverse ransom.
We have created and is supplemented its own base of sheet piles data of the production (steel and plastic sheet piles) of that produced by basic world producers. In the base is generalized and systematized the information about the characteristics more than 5020 in the world the sheet piles and combined sheet pile walls produced. The data base makes it possible to produce the automated selection of the sheet pile solutions with the normalized parameters for the purpose of the decrease of the prime cost of the projected sheet pile wall. We develop and we produce the new forms of sheet piles profiles, interlocks and connectors.
Trade from the storage and transit deliveries from the basic metallurgical plants of Russia and CIS of construction rolled metal product made of different steels - reinforcement AI-AV; Beam rolled, welded; Rolled wire, square, circle, strip, wire; hot/cold rolled sheet, zinc-coated, shaped; road grids, wall grids; Pipes steel profile, electric welding, cast iron, to; (un)equal leg angles, flange channels, sheet piles.

Welcome to visit

  • Booth Profile, Group of Firms 81C06
Promkomplekt

Welcome to visit

  • Booth Promkomplekt 81D44
Promnastil LLC specializes in grids manufacture.

Welcome to visit

  • Booth Promnastil LLC 81D45
"Promishlenny Vestnik" is a magazine and Internet portal www.promvest.info with more than ten years history. Now the magazine is published in both print and electronic format for iPad, Android devices. It is distributed at trade shows and in business centers.
The portal is visited by more than 200,000 industry professionals, Directors of enterprises, businessmen and investors.
Portal www.promvest.info is a news partner of Yandex.News and daily it publishes the latest information about all the industries and automotive industry news, the most important events in the economy, business and Finance for business.

Welcome to visit

  • booth Promyshlenny Vestnik 81D19
Purpose of publication — propagation of achievements of domestic science and industry, high technologies, the promotion of their use in the real sector of economy of the Russian Federation, the dissemination of professional knowledge; information support of business activity and the prestige of the emerging domestic high-tech companies, the management staff, scientists, major Industrialists of the Russian Federation; informing of competitive science-intensive products and services of domestic enterprises for their promotion to the markets of Russia and other countries.

Welcome to visit

  • booth Publishing House Engineer and Industrialist 81D48
ZMK Pulkovo
One of the largest manufacturers of metal structures and sandwich panels in the North-West Federal District of Russia.

Welcome to visit

  • Booth ZMK Pulkovo 81B41
R
Director: Mr. Victor Georgievich Samonchyk.
OJSC Rechitsa metizny plant, the largest enterprise in the Republic of Belarus, was established by the brothers Boris and Vladimir Rikk in 1912 as a wire and nails making factory. Now it is a member of Belarusian metallurgical company holding. The factory specializes in the manufacture of metal products: nails, wood screws, screws, self-tapping screws, bolts, screw nuts, rivets, shafts, splints and wires.
New production, Hot dip galvanizing shop, was put into operation on March 30th, 2011. The equipment manufactured by Gimeco company (Italy) was chosen as the basic equipment which enables to make galvanizing of metal structures with the length of 12.5 m, width of 1.5 m, height of 2.5 m and the mass of up to 7 tons and in automatic mode to make galvanizing of pipes with the length of 4.0 to 8.2 m and diameter of ½ to 4 inches. The possible coating thickness is from 40 to 250 micron.
The production capacity of the shop comes to 130 tons per day. Manufacturing process and buildings fully meet the most stringent environment and labour safety requirements as evidenced by the data of systematic monitoring conducted by supervising organizations.
Quality management system for hardware manufacture and rendering services of zinc coating application on steel pipes and metal structures by means of hot dip galvanizing is certified for meeting the requirements of STB ISO 9001-2015.

Welcome to visit

  • Booth Rechitsa Metizny Plant 81C36
RHYTHM of Machinery, Magazine — the special magazine on equipment market, industrial instrument, rigging, components and concomitant materials.
Circulation: 10 000 copies.
Magazine is issued 10 times a year (since 2002). Format A4.
Free highly effective mailing to specialized businesses.
Free distribution on exhibitions Important information for engineering auditory.
Actual information for machine-builders.

Welcome to visit

  • booth RHYTHM of Machinery 81D48
Romek
The company ROMEK manufactures wide range of lifting equipment. The company offers cargo slings (wire rope slings, textile slings, chain slings), metal structures (lifting beams, clamps), steel wire rope, wide range of rigging, components for slings, everything for lifting, securing and movement of cargo.

Welcome to visit

  • Booth Romek 81A44
Kompozit produces the following Informative science-and-engineering journals (distributed through subscription):
- “Construction materials, equipment and technologies of the XXI century” (15 000 copies monthly);
- “Concrete technologies” (15 000 copies monthly);
- “Roofing and insulation materials” (15 000 copies monthly);
- “Dry plasters & mortars” (15 000 copies monthly).

Welcome to visit

  • booth Roofing and Insulating Materials 81D29
Russian Coatings, JSC is a manufacturer of high-quality and cutting edge anticorrosive coatings for a number of industries: construction, oil and gas, chemical. Under the Prodecor (Protective and Decorative) brand "Russian Coatings" produce a wide range of products and unique solutions, customised by the company's R&D center for a customers needs. Our own binders, high educated scientific stuff and modern production facilities make Russian Coatings a leader of coating enterprises in Russia. In 2018 the company celebrates 180 years old.

Welcome to visit

  • Booth Russian Coatings 81A16
Founded in 1985 Russian Forgers' Union unites more than 900 professionals in decorative forging and skillful gunsmithsform all over Russia.

Welcome to visit

  • booth Russian Forgers Union 81D16
Russian Union of Metal and Steel Suppliers is a non-commercial organization, uniting on the voluntary basis Russian companies, firms and organizations operating in different segments of metal and steel products market including metal and steel rolled products, tubes and pipes, metalware, as well as metal scrap collecting and recycling.
The majority of members of the Union are companies that proved to be reliable and professional partners in the metal and steel products market. Their activity includes both trading from stocks, manufacturing diversified types of metal products as well as metal working and processing.
The Union carries out projects aiming at the raising of the Russian metal and steel products market as well as at strengthening of the competitive power of the members of the Union.

Welcome to visit

  • booth Russian Union of Metal and Steel Suppliers 81C18
S

Welcome to visit

  • Booth KVOiT, Schelkovo Plant 81A26
Schoeck
Company Schoeck produce and distribute Thermal Break Elements for Steel constructions – Isokorb KST.

Welcome to visit

  • Booth Schoeck 81A36
SciAps is a Boston-based instrumentation company specializing in portable analytical instruments. For the scrap sorters and metal producers we make both high performing X-ray and Laser based alloy analyzers. New: Z-200 C+ - the only handheld LIBS analyzer that now offer carbon concentration measurements in carbon steels, cast irons and stainless. Z quantifies carbon, and other alloying elements, with high enough precision to also report carbon equivalents. X 250 Turbo - the only X-ray gun that’s fast on every alloy. X reduces test time to 2 sec. for 99% of the Al alloys.

Welcome to visit

  • Booth SciAps Russia 81C09
Servis Torg
Company Servise Torg - represents the brands LinePlus and Munhwa. Our assortimen includes high-tech markers for industrial and professional marking (Paint Marker).

Welcome to visit

  • Booth Servis Torg 81D25

Welcome to visit

  • Booth Severstal-Metiz 81C16

Welcome to visit

  • Booth SoyuzKomplektAvtoTrans 81D30
SPCCP
The company SPC Corrosion Protection produces high-quality compounds:
- For cold galvanizing of metal "GALVANOL®" (96% zinc);
- Metal-polymer aluminum protective and decorative composition "ALINOL®».
Also, our company provides services to galvanizing steel and metal constructions.
Airless spraying of zinc (patented composition "Galvanol ®») abrasive method to clean to Sa 3 (ISO 8501-1:2007) surface produces zinc coating with a thickness of 60—80 microns, which is comparable to its protective properties of coatings applied by other methods of galvanizing.
Modern technologies and equipment, qualified personnel, quality control at all stages of production work — a guarantee of a stable and mutually beneficial cooperation with SPC Corrosion protection.

Welcome to visit

  • Booth SPCCP 81B31

Welcome to visit

  • Booth Stablid Group 81B36
Stankoinstrument
Stankoinstrument Journal covers the most pressing problems of the machine-tool industry.
Printrun: 5000 copies.
Periodicity: 4 times a year.
Distribution: on subscription, at trade fairs.

Welcome to visit

  • Booth Stankoinstrument Каталог
The Association unites all market participants in steel construction: the leading steel manufacturers and suppliers, steel fabricators and erectors, research and design institutes, architects, high schools.

Welcome to visit

  • Booth Steel Construction Development Association 81A02

Welcome to visit

  • Booth Steel Construction, Group of Enterprises 81C05
STEEL.LIFE
STEEL.LIFE is a specialized advertising and information publication for professionals in industrial supply and marketing who value time and quality.
The publication focuses on a conceptually new approach in covering the main aspects of the most important sector of the economy — the steel market.
In the magazine, you can not only read review articles on the steel market, profitably present your company, find a trusted supplier, but also get acquainted with useful advice from experts in the field of taxation and law.

Welcome to visit

  • Booth STEEL.LIFE 81D48
Stroitelnaya Orbita — Russian trade magazine, published since 2003.
The main content is articles about the state of the construction industry, and information about the best technologies, design solutions, energy conservation, environmental issues, the state of Affairs in housing and communal services, road sector of the country.

Welcome to visit

  • booth Stroitelnaya Orbita 81D06
SwedSteel

Welcome to visit

  • Booth SwedSteel 81D22
T
Tagil Steel, Industrial Metallurgical Holding Company is a trading and manufacturing company specializing in comprehensive supply of steel structures and welded beams. The partners of the holding are the manufacturers of Ural plant of welded beams, JSC, Metallinvest-factory of a metalware LLC in Nizhni Tagil and Chelyabinsk.

Welcome to visit

  • Booth Tagil Steel Holding 81B12
Tehsovet Premium, Industrial Magazine covers technologies, equipment,
materials and services applicable to various industries. It’s mission is to help companies in their search for
business partners. It is well known as a comprehensive source of highly reliable information to top executives in
major industrial companies in the Russian Ural region. We provide an excellent printing base coupled with the
variety of available ad formats and highly competitive pricing.

Welcome to visit

  • booth Tehsovet Premium 81D48
Teplant
Teplant – 3 automatic sandwich panel lines for stone wool filled panels, of the latest generation, from Robor Srl. (Italy). 2 automatic stone wool lines from Gamma Meccanica Srl. and STM Technologies Srl. (Italy). 1 automatic painting line for metal sheets from O.M.S.A. Srl.(Italy). 1 line for the production of corner panels. 4 lines for the production of finishing elements up to 10m.

Welcome to visit

  • Booth Teplant 81B18
Camelot Publishing media company working at the Oil&Gas press market since 2001 offer Your kind attention scientific and technical magazines "Gas Industry", "Neftegaz Territory", "Corrosion on the Territory of Neftegaz". Reliable and professional narrative of up-to-date industrial information, the scientific importance of articles, value in expert community is characteristic of each of these magazines entering in the list of Higher Attestation Commission of the Russian Ministry of Education and Science (VAK).

Welcome to visit

  • Booth Territory Neftegaz 81D48
TRANSSTROYPROJECT since 2008 has been designing transport infrastructure facilities.
The Institute specializes in the design of bridge structures with metal span structures using 3D models, providing a modern design approach. It performs both complex design and development of separate sections of design documentation for the construction of bridges, overpasses, overpasses, interchanges, pedestrian crossings and other transport facilities, as well as for prefabricated buildings with a bearing metal frame (warehouses, workshops, shopping and entertainment complexes, sports complexes, business centers) and other metal structures.
We care about our customers, making the most profitable offer individually to everyone.
TRANSSTROYPROJECT is a guarantee of high quality and timely delivery of project documentation.

Welcome to visit

  • Booth TRANSSTROYPROEKT 81B47
Trubmet
TrubMet specializes in manufacture of a wide range of welded sheet piles similar to Larssen sheet piles and other types of steel products.

Welcome to visit

  • booth Trubmet Каталог
Tula Metal Structures Plant was opened on the base of a late machine-building plant Kombaynmashstroy, JSC.
Metal structures:
- Building metal structures (The frame of buildings and structures, columns, slabs, beams, domical structures);
- Bridge metal structures (bridgeworks, overhead roads, overpasses, tunnels);
- I-beam.
We specialize in the area of design, manufacture, delivery and installation of metal structures of any complexity.
The Equipment:
- Automated lines for cutting and drilling of long products, plasma and gas cutting, a high-tech line for production of I-beams;
- Box-beams and variable sections beam, automatic installation shot blasting of surface.
The main shops of plant are equipped with an electric bridge cranes with capacity from 5 to 30 tons.
Total productive capacity allows to produce up to 1,200 tons of construction steel and 600 tonnes of I-beam per month.

Welcome to visit

  • Booth Tula Metal Structures Plant 81C31
V
VEKTOR GRUPP
Equipment for production of steel structures: welding, metalworking. Design and manufacture of steel structures.

Welcome to visit

  • Booth VEKTOR GRUPP 81B26
VOMZ, JSC — manufacturer of lifting equipment under the trade mark VELKRAN. Plant serially produces gantry crane and bridge load capacity up to 160 tons, jib cranes, stackers, mechanized warehouses, rail cars and other equipment.

Welcome to visit

  • Booth Velikiye Luki Experimental Machine Building Plant 81B35
VI-MENS
VI-MENS — high-quality Ltd. — band saw VI-MENS, band saw WIKUS (Germany), band sawing machines MEBA (Germany), unit-type metal construction lines and technologies Peddinghaus (USA), machinery for processing valves STEMA/PEDAX (Denmark/Germany).

Welcome to visit

  • Booth VI-MENS 81B03

Welcome to visit

  • Booth Vorsmensky Knife 81D09
Vtorichnye Metally
The unique issue in the country, which specialized on the scrap branch devoted to problems, scientific development and technologies, economy and legislative maintenance of the market of grab iron and wastes of ferrous and non-ferrous metals. It is distributed in all regions of Russia, countries of CIS, provides in administration of President of Russian Federation, Gosduma of Russian Federation, on metallurgical centres and firms engaged in processing of a grab iron. It participates in all profile exhibitions, scientific - practical conferences and seminars.
The magazine is fullcolour, circulation 5 000 copies, 54 strips. Periodicity: 1 number per 2 months.

Welcome to visit

  • Booth Vtorichnye Metally Каталог
VZSK-prom

Welcome to visit

  • booth VZSK-prom 81B17
W
WA Kurgan
WA Kurgan is a modern high-tech enterprise engaged in the production fnd sale of cast steel shot and steel grit under the W Abrasives brand.

Welcome to visit

  • Booth WA Kurgan 81B29

Welcome to visit

  • Booth Weber Comechanics 81B43
Z

Welcome to visit

  • Booth Zinc Development Center 81D18

More
Subscription to newsletter